Evaluate strategies which may be used by businesses Essay Example for Free

Evaluate strategies which may be used by businesses Essay Evaluate strategies which may be used by businesses and governments to improve the competitiveness of a country’s goods and services. Competitiveness is the ability of a firm or a nation to offer goods and services that meet the quality standards of the local people and world markets at prices that are competitive and provide adequate returns on the resources employed or consumed in producing them. Governments have an important role for improving the competitiveness of their country’s goods and services. Governments are able to change regulations and taxes according to what they believe about their country’s state of economy. For example, a government may decide to decrease the corporation tax in order to improve the competitiveness of a country’s goods and services. A decrease in the corporation tax will encourage new firms to set up and existing firms to invest. Corporation tax is a levy placed on the profit of a firm with different rates used for different levels or profits. They are taxes against profits earned by businesses during a given taxable period. If there is a decrease in the corporation tax, it means that firms will have an increased retained profit since less money goes to the government revenue. This will allow firms to use this money to improve competitiveness. More spending on investment will be possible which will increase productivity. If the firms invest on capital goods such as machinery that will benefit the firm by producing at lower cost, then the firm might able to set lower prices in order to improve price-competitiveness. For example the UK government reduced the headline corporation tax rate from 30% to 28% in 2007 Budget. Reducing corporation tax increased the retained profits for UK firms that can plough back into investment projects. This should help to boost the UK capital stock. It should also help the UK to keep attracting foreign direct investment which improves the competitiveness furthermore since British firms may gain from the advanced technology and innovation of foreign multinationals. (Technology transfer) However, if the government decreases corporation tax, there might be some firms that decide to save the retained profits instead of spending on investment. This might be because there is a period of recession and firms might find it risky to invest. In addition many firms have chosen not to reinvest as they have been more concerned with making short term profits rather than investing in the future. If firms choose to save rather than invest their retained profits, a decrease in the corporation tax wouldn’t improve competitiveness. Another measure to improve competitiveness is to increase government spending on education and training. If the government can improve the quality of teaching in schools and universities and encourage more people to go to university, then this should lead to increase in productivity of the workforce in the future. Greater productivity will lead to greater efficiency in firms which will in turn lead to lower average costs of production. This may improve the price competitiveness of UK goods and services. In addition it would improve the non price competitiveness since a more educated workforce is likely to be able to be more creative and innovative. Greater innovation should lead to better quality products and the creation of patents, copyrights, brands etc. However, increased spending on education and training by the government does not always lead to increased global competitiveness. It will depend greatly on exactly how the money is spent. For example expenditure for improving school buildings or Ofsted inspections may not necessarily improve the effectiveness of the teachers and the quality of education. On the other hand spending on training teachers and advancing their professional development, might be a more effective means of improving educational standards in the future and increasing productivity. However even in this case the effects are not likely materialise until the longer term. Another way in which the government can improve the non price competitiveness and price competitiveness in international markets is to encourage innovation and research. Tax allowances have been made available to businesses spending on innovation and research. However, there has also been a variety of programmes which enable some businesses to gain grants for research and development R D and to set up knowledge transfer networks and universities. Such measures are likely to be more successful than tax cats since firms are given incentives to research and development through receiving tax concessions and from making connection to universities where they have the opportunity to learn about the latest scientific and technological advancements. On the other hand businesses, are able to introduce a variety of measures to improve the competitiveness of the goods and services. These include increasing the level of investment on new technology, on staff training, on ICT, etc . One way by which businesses might improve the competitiveness of their goods or services is by increasing the spending on R D. By increasing the spending on R D, businesses will most probably benefit from product and process innovation. If a business manages to create a unique and different product than the rest products in the market, it would be able to compete much more easily since consumers will prefer to buy the most innovated and technological updated products. For example Steve Job’s firm, Apple spent $758 million on RD during the first fiscal quarter of 2012. If we take Apple as an example which is one of the most profitable companies, we clearly see that it has benefited from the heavy spending on R D. It has come up with products such as the iPhone where the sales reached the number of 98,144,000 in the first three quadrants of 2012. However, some businesses prefer not to spend on R D because they do not think about the longer term. Also there are other firms that fail to spend on R D. For example the procedure of R D may result in no innovative products or procedures that will improve competitiveness and therefore. Another way, by which businesses might improve competitiveness, is by improving productivity. Productivity is the output per worker. There are different ways by which productivity can be improved. For example if the firms increase the wages, workers might be motivated to work harder. Also, training can improve the knowledge and skills of staff. Improved recruitment and selection may have the same effect which will increase productivity in the short term. If the business increases spending on training, workers will be more educated and informed about their job. This will increase the productivity since they will be able to produce more output at the same working hours and wages. If the productivity is increased, it means that more output will be produced at relatively the same costs. This will allow the firm to get bigger in size, lower the running and operational costs, increase income and gain a greater share of the market. This will increase both price and non-price competitiveness. However productivity doesn’t always improve competitiveness. For example if training isn’t done effectively, and workers do not give attention or really care about the job, then they won’t improve their knowledge and skills, training will not improve productivity, and therefore productivity will not improve competitiveness. In addition, productivity might not improve competitiveness because in the case of increasing the wages in relation of the output the worker producers, there are workers that wouldn’t be motivated by an increase in their salary and therefore will not produce a greater output. Productivity can be used as a measure to improve competitiveness only if it is used correctly and it can increase both price and non-price competitiveness. It can improve price competitiveness by allowing the businesses to set lower prices and improve non-price competitiveness by expanding as a firm and increasing its popularity.

Housing Statistics Essay Example for Free

Housing Statistics Essay The regression line is also known as the best fit line for the given data. The data points may not form a straight line. The line that best fits or best describes the relationship of the given dependent and independent variables is the line that would have the minimum perpendicular distance from the given data points. This line is used to analyze the relationship of the different variables given. It can also be used to predict or estimate other data points. In this paper, the regression line of the given data will be computed using a given tool from a certain website. The data will be analyzed to help in the decision making of the owner of the construction business. With the information given above, there is no question that the number of housing starts increases as the interest rate goes down. With the predictions of financial experts that mortgage rates will continue to dip in the next coming years, the housing construction business should be prepared in the possible increase in demands. Being the owner of a housing construction business, effective project planning should be in place. The employees should be prepared with the possible increase in the demand of housing construction projects as the interest rates continue to go down. A plan should be in place covering how to approach the possible increase in demands. Risks and uncertainties should also be identified as early as possible and there should be a detailed work breakdown structure to get ready for the coming projects. The plan should also encompass all aspects of the construction business from the materials procurement, subcontractors to employees who will be working on the projects. It should also include plans for the next coming years as the trend will probably continue as forecasted by financial experts. The data given should be used to forecast demands as accurate as possible. Using the data in the forecast, accurate measures can be implemented in terms of working with subcontractors and where to source materials. Decisions to be made with regard to projects will depend a lot on the data being forecasted by experts. Reference Ramat-Gan. (2003, June 30). Interest Rate Plunge Will Continue. Lecture Notes. Waner, S. Costenoble, S. (1999). Simple Regression. Retrieved August 2, 2006 from http://people. hofstra. edu/faculty/Stefan_Waner/newgraph/regressionframes. html

Major Causes Of Voltage Instability

Major Causes Of Voltage Instability I. INTRODUCTION Power system stability is defined as the characteristics of a power system to remain in a state of Equilibrium at normal operating conditions and to restore an acceptable state of equilibrium after a disturbance. The power systems are heavily stressed due to the increased loading and this leads to voltage stability problem. Voltage Stability can also be called as the load stability. A power system lacks the capability to transfer an infinite amount of electrical power to the load. The main factor causing voltage instability is inability of the power system to meet the demands for reactive power in the heavily stressed systems to keep desired voltages. Voltage instability in the system generally occurs in the form of a progressive decay in voltage magnitude at some of the buses. A possible outcome of voltage instability is loss of load in an area, or tripping of transmission lines and other elements by their protective system leading to cascading outages. FACTS devices have been used, both for steady state power flow control and dynamic stability control. Using controllable components, such as controllable series capacitors and phase shifters, line flows can be changed in such a way that thermal limits are not violated and losses are minimized. These also increases stability margin, help in fulfilling contractual requirement, without violating system operating limits. II.VOLTAGE STABILITYANALYSIS Continuation Power Flow Continuation power flow was introduced to solve this singularity problem. The continuation power flow can be described as a power flow solution that can maintain the stability of the power system under normal and disturbances conditions. Therefore the main purpose of Continuation Power Flow is to find the continuity of power flow solution for a given load change. It employs the predictor-corrector scheme with an addition of load parameter ÃŽÂ » and the technique used is local parameterization. Figure 1 Predictor and Corrector illustration in CPF As shown in Fig.1, it starts from a known solution and uses a tangent predictor to estimate a subsequent solution corresponding to a different value of the load parameter. This estimate is then corrected using the same NR technique employed by a conventional power flow. The local parametization provides a means of identifying each point along the solution path and plays an integral part in avoiding singularity in the Jacobian. First let ÃŽÂ » represent the load parameter such that 0 à ¢Ã¢â‚¬ °Ã‚ ¤ ÃŽÂ » à ¢Ã¢â‚¬ °Ã‚ ¤ ÃŽÂ » critical Where ÃŽÂ »=0 corresponds to base load and ÃŽÂ »= ÃŽÂ » critical corresponds to critical load. We incorporate ÃŽÂ » into conventional Newton Raphson load flow equations. Load change in PLi and QLi terms are modified by breaking each term into two components- one corresponds to original load and other represents load change brought about by a change in load parameter ÃŽÂ ». Thus PLi= PLi0 + ÃŽÂ »(kLi SΆbase cos ÃŽÂ ¨i) (1) QLi= QLi0 + ÃŽÂ »(kLi SΆbase sinÃŽÂ ¨i) (2) Where the following definitions are made; PLio, QLio original load at bus i, active and reactive respectively. kLi multiplier to designate the rate of load change at bus i as ÃŽÂ » changes ÃŽÂ ¨i power factor angle of load change at bus i SΆbase- a given quantity of apparent power which is chosen to provide appropriate scaling of ÃŽÂ » In addition, the active power generation is modified as: PGi = PGio (1+ÃŽÂ » kGi ) (3) Where PGio is the active generation at bus i in the base case and kGi is a constant used to specify the rate of generation as ÃŽÂ » varies. Now the Jacobian gets modified with the addition of a new element dÃŽÂ ». The tangent vector is calculated and the predicted solution is determined. With the local parametrization technique corrected solution is obtained. B. Contingency Ranking 1) Static Loading Margin Contingencies such as unexpected line outages often contribute to voltage collapse blackouts. These contingencies generally reduce or even eliminate the voltage stability margin. To maintain security against voltage collapse, it is desirable to estimate the effect of contingencies on the voltage stability margin. Action can then be taken to increase the margin so that likely contingencies do not cause blackout. Contingency can be defined as to a condition which involves removal of line, disconnection of generator or transformer. This creates a condition which disturbs the normal state of the system and may lead to voltage instability. A number of methods have been proposed for static voltage stability based contingency ranking. However there exists a need of efficient method requiring minimum computational time to accurately rank the contingencies based on static voltage stability Figure 2 Static loading margin The system contingencies have been ranked based on post contingency VAR requirement using two methods-Static Loading Margin (SLM) and Reactive Compensation Index (RCI). True ranking of the various contingencies have been obtained considering post-contingency static loading margin. The foremost step is to perform continuation power flow by using PSAT software. The static loading margin is the distance between the base case operating point and the nose point. A contingency having smaller value of the static loading margin can be considered more severe. 2) Reactive Compensation Index Reactive compensation index is used to perform voltage stability based contingency ranking by measuring severity of the outages. It is based on the premise that the distance between the normal case (pre contingency) nose point (max loadability point) and the post-contingency case nose point can be approximated by the total reactive injection required at the load buses to maintain similar voltages. The ranking obtained by reactive compensation index is compared with the true ranking. III. FACTS DEVICES The flexible AC transmission systems controllers have been established as an effective means in improving the system stability including voltage stability, enhancing loadability and also providing voltage control. TCSC Figure 1 shows the simple diagram of TCSC comprised of a series capacitor bank, shunted by a Thyristor Controlled Reactor (TCR), to provide a smoothly variable series capacitive reactance. It is a one-port circuit in series with transmission line; it uses natural commutation; its switching frequency is low; it contains insignificant energy storage and has no DC port. Insertion of a capacitive reactance in series with the lines inherent inductive reactance lowers the total, effective impedance of the line and thus virtually reduces its length. As a result, both angular and voltage stability gets improved. However, the sub synchronous series resonant frequency is produced that introduces negative damping of generator models leading to unstable system. That is the reason for not placing TCSC between lines having generators at both the ends. Figure4 Equivalent circuit of TCSC SSSC Static Synchronous Series Compensator (SSSC) is a voltage sourced converter based series FACTS device that provides capacitive or inductive compensation independent of line current. The SSSC is a synchronous voltage type compensator which is analogous to an ideal electromagnetic generator that produces a set of alternating voltages at the desired fundamental frequency with controllable amplitude and phase angle. The operating principle is based on conventional series capacitive compensation which is used as a means of reducing the line impedance, which in turn increases voltage, current and transmitted power across given physical line. The SSSC offers fast control and it is inherently neutral to sub-synchronous resonance. Figure 5 Equivalent circuit of SSSC IV. SENSITIVITY ANALYSIS For optimal placement of series FACTS devices, linear sensitivity of loading factor (ÃŽÂ ») with respect to line reactance has been computed using MATLAB coding technique. The calculation of the index is done such that transformers and lines connected between generators at both ends are excluded. The line having the most negative value of the Æ ÃƒÅ½Ã‚ »/Æ Xij sensitivity factor for the critical contingency cases has been identified for optimal series FACTS devices placement. Sensitivities are calculated under severe outage conditions at a stressed point near to maximum loadability point i.e. the values of voltage, angle and power factor are taken at the critical point as obtained from Continuation Power Flow results. The optimal location of TCSC placement has been considered in a line producing maximum in each line A criterion for the optimal placement of TCSC, in this work, has been that it should not be placed in aq line connecting two generator buses. V. DYNAMIC ANALYSIS Dynamic voltage stability is analyzed by monitoring the Eigen values of the linearized system as a power system is progressively loaded. When the ÃŽÂ » parameter varies, the equilibrium points of the dynamic system also vary accordingly, and so do the Eigen values of the corresponding state matrix ASYS. The equilibrium points are asymptotically stable if all the Eigen values have negative real parts. The point where a complex conjugate pair of Eigen values reaches the imaginary axis with respect to changes in ÃŽÂ » is known as Hopf Bifurcation point. Power system oscillations are associated with a pair of complex Eigen values of equlibria crossing the imaginary axis of the complex plane, from the left half plane to the right half plane, when the system undergoes sudden changes. If this particular dynamic problem is studied using gradual changes it can be viewed as Hopf bifurcation problem. Thus by predicting these types of bifurcations well in advance, a possible dynamic instability problem may be avoided. Figure 6 Hopf Bifurcation point VI. RESULT AND DISCUSSIONS To implement the optimal placement two case studies were taken of IEEE 14 bus system and 39 bus New England system. The software packages used in the system analysis are MATLAB, and PSAT (power system analysis toolbox) A.STATIC ANALYSIS: Continuation power flow for intact system was performed and SLM was found to State of the system Divergence point Weakest Bus Intact 2.88 5 With TCSC 3.10 4 With SSSC 3.20 4 Table 2 Comparison of loadability of the 14 bus system Line outages SLM True Ranking RCI Ranking 1-2 * 1 0.308 1 2-3 0.5593 2 0.2798 2 1-5 0.5596 4 0.1292 3 5-6 0.65508 3 0.1271 4 7-9 0.7066 5 0.0815 5 Table 1 Contingency based ranking for SLM and RCI for 14 bus system Fig7 PSAT simulink model of IEEE14 bus Test system For the placement of series FACTS devices sensitivity index for various cases is calculated and it is inferred that line 1-5 is the optimum location as the index is having most negative value for it. Newton Raphson load flow was performed on the 14 bus system and the values of P load were incremented in steps of 0.2 percentage of loading with NR load flow being performed again on the modified system. The NR diverged at 2.88 times of loading and system suffered voltage collapse. The weakest bus observed to be is the 5m bus followed by 4m bus. With TCSC placement, the NR diverges at 3.1times loading while it does the same for 3.2 when SSSC is incorporated. Thus proving that compensation provided by series FACTS devices enhances the capacity of the system to bear stress in the form of increased load. The improvement in the voltage profile for the 5th bus is better with SSSC as compared to TCSC. B. DYNAMIC ANALYSIS: The test case considered for the dynamic analysis is IEEE 14 bus system. The approach to study the stability is Hopfield Bifurcation as already mentioned. For the analysis of dynamic stability, dynamic model of 14 bus system was made which includes synchronous generators and AVR connected at the PV buses apart from the other static components. After obtaining the Hopf bifurcation of the system for the weakest bus the optimal location of the FACTS devices is determined and they are placed accordingly to provide stability to the system. The power flow is performed for the intact system and the Eigen values are found to be negative with PL = 0.076 p.u. at bus 5. When the PL is increased to 2.419 times of the initial load, two Eigen values cross the imaginary axis leading to Hopf bifurcation and instability. To render stable conditions, TCSC is optimally placed in line 1-5 based on the sensitivity index already calculated and it is found that the load can be increased till 5.58 times of the actual load before reaching the Hopf bifurcation point. The comparison of the stable and unstable system due to increased loading effect is depicted by the Figures 9 and 10. The placement of SSSC is not possible as it produced negative compensation in the system which can be related to the presence 3 synchronous condensers in the IEEE 14 bus system. This is inferred from the fact that SSSC, also acting as a VAR generator at times, adds to the reactive power generated from the other dynamic components present in the system. VII. CONCLUSION: Static voltage instability in the system may occur due to deficit of reactive power. The reactive power requirement of the system may increase under severe contingencies. Therefore, contingency ranking based on Static voltage stability criterion, can be obtained based on the extra reactive support requirement from existing sources. Dynamic voltage instability, on the other hand has been attributed to Hopf bifurcation when one pair of Eigen values of the systems state matrix reaches imaginary axis, following change in the system parameters such as load. FACTS devices prove to be an effective remedy in enhancing system voltage stability. But due to high cost of FACTS controllers their placement should be such as to improve both static and dynamic voltage stability. The comparison between the placement of TCSC and SSSC has been shown for both the static and dynamic analysis. SSSC is found to be best suited for the static stability enhancement whereas the dynamic stability improvement incorporates only TCSC.

Gun Control Essay -- Persuasive Essays

In the wake of all the school shootings in the past fifteen years gun control has become a more serious issue than before. Gun control has always been a concern in the United States, but not until the first major school shootings at Columbine High School in Littleton, Colorado did this topic become a reality to the American public. In 1999, this massacre left fifteen people dead including the assassins. And just recently on March 5, 2001 did the tradition continue, when Charles Andrew Williams killed two classmates, leaving many injured in Santee California.   Ã‚  Ã‚  Ã‚  Ã‚  School shootings has become a very popular topic in the arguments for gun control. Gun control laws focus on making guns more difficult to obtain, as well as easier to trace (Smith 4). Although, many see gun control as a violation of their amendments. The second amendment in the constitution proclaims that as citizens of the United States, a person has â€Å"the right to bear arms.† Now, this amendment does not apply to everyone, those who have been convicted of a felony may not own a gun. One can take three sides in the political battle over gun control. The sides are for gun control, against gun control, or gun control with restrictions. It is all very confusing, but somehow the Democratic and Republican parties make it easier for us to understand. In their own words of course, and sometimes they might agree with each other. Sometimes....   Ã‚  Ã‚  Ã‚  Ã‚  The Republican Party be...

The Rise of the Individual Essay -- Enlightenment of the 18th Century

The transition from a condition of little autonomy to one that recognizes the individual is often gradual. This is evident in our own personal lives. When we were very young, our parents, in trying to guide us down the right path, pretty much dictated what we could and could not do and laid out all of our beliefs for us. As time passed and we worked our way from kindergarten to college, we were exposed to new ideas, providing us the motivation to seek more rights and allowing us to define and redefine ourselves as individuals. This same ideology is true of societal transitions. By substituting Old Regime ideals for kindergarten and various revolutions for grades in school, this can be seen. In the early 1700s, the practices and ideals of European government, which came to be known as the Old Regime, offered society little individual freedom. Gradually, as Europeans witnessed the Scientific Revolution, the Age of Enlightenment, the French Revolution, and the reign of Napoleon, they were exposed to new ideas. The people of Europe took these ideas and incorporated them into society, ultimately leading to the birth of individualism. The Old Regime was a time characterized by absolutism, both real and unreal, and an agrarian economy that grappled to produce enough to meet the needs of the general public. People felt they were powerless over nature. Because life was often "nasty, brutish, and short," family life centered on survival, and collective interest took priority over individual interest. Marriage, which took place at a young age, was normally the result of economic necessity rather than love, and after marriage, women became slaves to child bearing to ensure that they would have a male who lived until the age of inherit... ...versity of Illinois Press, 1979), 92-96. 12. Rogers, Aspects of Western Civilization, 67. 13. Rogers, Aspects of Western Civilization, 64. 14. Kagan, The Western Heritage, 466. 15. Rogers, Aspects of Western Civilization, 105. 16. Kagan, The Western Heritage, 468. -------------------------------------------------------------------------------- Additional Source Cooper, Barbara T., and Mary Donaldson-Evans. Modernity and the Revolution in Late Nineteenth-Century France. Newark: University of Delaware Press, 1992. This book includes historical essays about the ever-changing politics and society of nineteenth-century France. The essays were selected from papers presented at the fifteenth annual Colloquium in Nineteenth-Century French Studies, held at the University of New Hampshire in October 1989. They are relevant to the rise of the individual.

The Poetic Style of Henry Charles Bukowski Essay -- essays research pa

Henry Charles Bukowski Poetry is the art of rhythmical composition written or spoken for exciting pleasure by beauty imaginative or elevated thought. It is also literary work in metrical form. By definition, a poet is a person how composes poetry. The relationship between poetry and the late Henry Charles Bukowski is equivalent to that of a professional ice skater and the ice that he skates on . By the same token, it compared to something a bit less governed, although a pro ice skater is free to graze the ice at his own expense, the root of professional ice skating is indeed restricted. For example, judges, rules, regulations, agreements, terms, and contracts that can't be waived, which controls the skater. Compared to a bird in the sky, the previous example falls short of my perception of freedom when relating it to poetry and Bukowski. A bird in the sky greatly broadens the very core of my argument, at the exact same time contradicting the argument -for those with the keen eye. Buk owski's writing define...

Corruption in Malaysia

I have oral test with my group on next weak and I have found this text on internet? Composition of Forum Example Essay Title: Corruption Chairman of the Forum: greetings. The teachers and classmates. As of this morning we are thankful for another opportunity to discuss social problems which I think is more chronic in the absence of drastic measures taken to address them. Without delay time, let me introduce the panel members, which left me was his right split B and C are the relative Title of the forum this morning is â€Å"the problem of corruption inMalaysia. † Next, I call our first panel, the relative B provides definitions of corruption and its characteristics. Brother B: hi and thank you chairman. Web-based anti-corruption commission (MAC), corruption is an act that involves giving and receiving of money or specific goods with intent to prevent the action taken or receive privileges. Corrupt practices involving all levels of society whether in public or private sector. W hich kind of support will be in the form of material, such as money, cars and houses, and forms of entertainment such as women.Brother C: According to the Prime Minister, Dates Series Abdullah Madam Bawd described the corruption as a cancer and if left unchecked will cause a government collapse and thereby tarnish the image in the eyes of the international. Chairman: We have been clear on the issue of corruption. Now what are the opinions of our panel members about the causes of corruption? Brother B: My chairman. Let me put in a bit. The main cause is peer influence. When I saw my colleagues being corrupt and enjoy the luxuries of life without any action, a person would be tempted to accept bribes.Stress at work is able to interfere with feelings, especially if senior officers were also involved. Without thinking, one that will be easily affected and were corrupt because they want to quickly enjoy the luxury of living in this mortal world. Chairman: C Maybe you want to add an opini on on the cause of corruption? Brother C: Chairman, I agree with you B. In addition, the law in our country are causing many poor people are not afraid of the punishment imposed.For example, legal action is considered a light punishment to the culprits of corruption as impaired with the number of corruption are taken by them have given a negative outlook on the capabilities of our Judicial system to address this issue. In addition, the lighter sentence is said to be motivated to certain parties to take the risk of corruption because the recipient is aware that coffee money they are able to enjoy Chairman: Thank you C, I hope we can all work together to prevent corruption and do not embarkation rooted in the minds of the people of Malaysia. Moreover, the problem is more serious.What is his relation to B steps to overcome? Brother B: Government should Meghan attitude of civil servants and the private for more trust and responsibility. The slogan â€Å"Clean, Efficient and Trustworthy † introduced by former Prime Minister Tuna Dry. Empathic Mohammad should be embraced by all public and private sector. Service counters have been introduced in all government offices to avoid the practice of giving and receiving â€Å"coffee money. † Bureaucracy should also be reduced or eliminated to create more efficient and effective. This was never raised by the Honorable Prime Minister in his speech in Parliament recently.Chairman: Thank you B. It appears that you have something to C is pronounced. Please. Brother C: The government should enforce laws for the public aware of how dangerous and serious problem of corruption, if not eradicated, and are confined to national security. Penalties are more severe Jail terms provided in the Anti- Corruption Commission (MAC) 2009 Parliament passed the new recently slogan can be daunting. The court also suggested that the maximum punishment. More power to act against people who refuse to cooperate den the MAC also can change the attitude of the hemp that has refused to cooperate.Whistler's should be rewarded. They should also get protection from the authorities. Chairman: Thank you C, and I think we are at the end of the forum. In summary, I think the problem of corruption in our country is a serious problem and needs to be addressed immediately. Therefore, I urge all parties to helping the government address this problem. In addition, let me express my gratitude to the highest members of the panel. However, what could I do not allow us time to talk further. Thank you. Is there any wrong word or sentences in this essays? Please help me.. BTW I'm from Malaysia